Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE

More Options

• Similar
• Compare

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity 0.8.25;

import "../interfaces/VBep20Interface.sol";
import "../interfaces/OracleInterface.sol";
import "@venusprotocol/governance-contracts/contracts/Governance/AccessControlledV8.sol";

/**
 * @title BoundValidator
 * @author Venus
 * @notice The BoundValidator contract is used to validate prices fetched from two different sources.
 * Each asset has an upper and lower bound ratio set in the config. In order for a price to be valid
 * it must fall within this range of the validator price.
 */
contract BoundValidator is AccessControlledV8, BoundValidatorInterface {
    struct ValidateConfig {
        /// @notice asset address
        address asset;
        /// @notice Upper bound of deviation between reported price and anchor price,
        /// beyond which the reported price will be invalidated
        uint256 upperBoundRatio;
        /// @notice Lower bound of deviation between reported price and anchor price,
        /// below which the reported price will be invalidated
        uint256 lowerBoundRatio;
    }

    /// @notice validation configs by asset
    mapping(address => ValidateConfig) public validateConfigs;

    /// @notice Emit this event when new validation configs are added
    event ValidateConfigAdded(address indexed asset, uint256 indexed upperBound, uint256 indexed lowerBound);

    /// @notice Constructor for the implementation contract. Sets immutable variables.
    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    /**
     * @notice Initializes the owner of the contract
     * @param accessControlManager_ Address of the access control manager contract
     */
    function initialize(address accessControlManager_) external initializer {
        __AccessControlled_init(accessControlManager_);
    }

    /**
     * @notice Add multiple validation configs at the same time
     * @param configs Array of validation configs
     * @custom:access Only Governance
     * @custom:error Zero length error is thrown if length of the config array is 0
     * @custom:event Emits ValidateConfigAdded for each validation config that is successfully set
     */
    function setValidateConfigs(ValidateConfig[] memory configs) external {
        uint256 length = configs.length;
        if (length == 0) revert("invalid validate config length");
        for (uint256 i; i < length; ++i) {
            setValidateConfig(configs[i]);
        }
    }

    /**
     * @notice Add a single validation config
     * @param config Validation config struct
     * @custom:access Only Governance
     * @custom:error Null address error is thrown if asset address is null
     * @custom:error Range error thrown if bound ratio is not positive
     * @custom:error Range error thrown if lower bound is greater than or equal to upper bound
     * @custom:event Emits ValidateConfigAdded when a validation config is successfully set
     */
    function setValidateConfig(ValidateConfig memory config) public {
        _checkAccessAllowed("setValidateConfig(ValidateConfig)");

        if (config.asset == address(0)) revert("asset can't be zero address");
        if (config.upperBoundRatio == 0 || config.lowerBoundRatio == 0) revert("bound must be positive");
        if (config.upperBoundRatio <= config.lowerBoundRatio) revert("upper bound must be higher than lowner bound");
        validateConfigs[config.asset] = config;
        emit ValidateConfigAdded(config.asset, config.upperBoundRatio, config.lowerBoundRatio);
    }

    /**
     * @notice Test reported asset price against anchor price
     * @param asset asset address
     * @param reportedPrice The price to be tested
     * @custom:error Missing error thrown if asset config is not set
     * @custom:error Price error thrown if anchor price is not valid
     */
    function validatePriceWithAnchorPrice(
        address asset,
        uint256 reportedPrice,
        uint256 anchorPrice
    ) public view virtual override returns (bool) {
        if (validateConfigs[asset].upperBoundRatio == 0) revert("validation config not exist");
        if (anchorPrice == 0) revert("anchor price is not valid");
        return _isWithinAnchor(asset, reportedPrice, anchorPrice);
    }

    /**
     * @notice Test whether the reported price is within the valid bounds
     * @param asset Asset address
     * @param reportedPrice The price to be tested
     * @param anchorPrice The reported price must be within the the valid bounds of this price
     */
    function _isWithinAnchor(address asset, uint256 reportedPrice, uint256 anchorPrice) private view returns (bool) {
        if (reportedPrice != 0) {
            // we need to multiply anchorPrice by 1e18 to make the ratio 18 decimals
            uint256 anchorRatio = (anchorPrice * 1e18) / reportedPrice;
            uint256 upperBoundAnchorRatio = validateConfigs[asset].upperBoundRatio;
            uint256 lowerBoundAnchorRatio = validateConfigs[asset].lowerBoundRatio;
            return anchorRatio <= upperBoundAnchorRatio && anchorRatio >= lowerBoundAnchorRatio;
        }
        return false;
    }

    // BoundValidator is to get inherited, so it's a good practice to add some storage gaps like
    // OpenZepplin proposed in their contracts: https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
    // solhint-disable-next-line
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.0;

import "./OwnableUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    function __Ownable2Step_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable2Step_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        require(pendingOwner() == sender, "Ownable2Step: caller is not the new owner");
        _transferOwnership(sender);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized != type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity 0.8.25;

import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol";

import "./IAccessControlManagerV8.sol";

/**
 * @title AccessControlledV8
 * @author Venus
 * @notice This contract is helper between access control manager and actual contract. This contract further inherited by other contract (using solidity 0.8.13)
 * to integrate access controlled mechanism. It provides initialise methods and verifying access methods.
 */
abstract contract AccessControlledV8 is Initializable, Ownable2StepUpgradeable {
    /// @notice Access control manager contract
    IAccessControlManagerV8 private _accessControlManager;

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;

    /// @notice Emitted when access control manager contract address is changed
    event NewAccessControlManager(address oldAccessControlManager, address newAccessControlManager);

    /// @notice Thrown when the action is prohibited by AccessControlManager
    error Unauthorized(address sender, address calledContract, string methodSignature);

    function __AccessControlled_init(address accessControlManager_) internal onlyInitializing {
        __Ownable2Step_init();
        __AccessControlled_init_unchained(accessControlManager_);
    }

    function __AccessControlled_init_unchained(address accessControlManager_) internal onlyInitializing {
        _setAccessControlManager(accessControlManager_);
    }

    /**
     * @notice Sets the address of AccessControlManager
     * @dev Admin function to set address of AccessControlManager
     * @param accessControlManager_ The new address of the AccessControlManager
     * @custom:event Emits NewAccessControlManager event
     * @custom:access Only Governance
     */
    function setAccessControlManager(address accessControlManager_) external onlyOwner {
        _setAccessControlManager(accessControlManager_);
    }

    /**
     * @notice Returns the address of the access control manager contract
     */
    function accessControlManager() external view returns (IAccessControlManagerV8) {
        return _accessControlManager;
    }

    /**
     * @dev Internal function to set address of AccessControlManager
     * @param accessControlManager_ The new address of the AccessControlManager
     */
    function _setAccessControlManager(address accessControlManager_) internal {
        require(address(accessControlManager_) != address(0), "invalid acess control manager address");
        address oldAccessControlManager = address(_accessControlManager);
        _accessControlManager = IAccessControlManagerV8(accessControlManager_);
        emit NewAccessControlManager(oldAccessControlManager, accessControlManager_);
    }

    /**
     * @notice Reverts if the call is not allowed by AccessControlManager
     * @param signature Method signature
     */
    function _checkAccessAllowed(string memory signature) internal view {
        bool isAllowedToCall = _accessControlManager.isAllowedToCall(msg.sender, signature);

        if (!isAllowedToCall) {
            revert Unauthorized(msg.sender, address(this), signature);
        }
    }
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.25;

import "@openzeppelin/contracts/access/IAccessControl.sol";

/**
 * @title IAccessControlManagerV8
 * @author Venus
 * @notice Interface implemented by the `AccessControlManagerV8` contract.
 */
interface IAccessControlManagerV8 is IAccessControl {
    function giveCallPermission(address contractAddress, string calldata functionSig, address accountToPermit) external;

    function revokeCallPermission(
        address contractAddress,
        string calldata functionSig,
        address accountToRevoke
    ) external;

    function isAllowedToCall(address account, string calldata functionSig) external view returns (bool);

    function hasPermission(
        address account,
        address contractAddress,
        string calldata functionSig
    ) external view returns (bool);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.25;

interface OracleInterface {
    function getPrice(address asset) external view returns (uint256);
}

interface ResilientOracleInterface is OracleInterface {
    function updatePrice(address vToken) external;

    function updateAssetPrice(address asset) external;

    function getUnderlyingPrice(address vToken) external view returns (uint256);
}

interface BoundValidatorInterface {
    function validatePriceWithAnchorPrice(
        address asset,
        uint256 reporterPrice,
        uint256 anchorPrice
    ) external view returns (bool);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.25;

import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";

interface VBep20Interface is IERC20Metadata {
    /**
     * @notice Underlying asset for this VToken
     */
    function underlying() external view returns (address);
}

{
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"calledContract","type":"address"},{"internalType":"string","name":"methodSignature","type":"string"}],"name":"Unauthorized","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldAccessControlManager","type":"address"},{"indexed":false,"internalType":"address","name":"newAccessControlManager","type":"address"}],"name":"NewAccessControlManager","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"},{"indexed":true,"internalType":"uint256","name":"upperBound","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"lowerBound","type":"uint256"}],"name":"ValidateConfigAdded","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"accessControlManager","outputs":[{"internalType":"contract IAccessControlManagerV8","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"accessControlManager_","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"accessControlManager_","type":"address"}],"name":"setAccessControlManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"asset","type":"address"},{"internalType":"uint256","name":"upperBoundRatio","type":"uint256"},{"internalType":"uint256","name":"lowerBoundRatio","type":"uint256"}],"internalType":"struct BoundValidator.ValidateConfig","name":"config","type":"tuple"}],"name":"setValidateConfig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"asset","type":"address"},{"internalType":"uint256","name":"upperBoundRatio","type":"uint256"},{"internalType":"uint256","name":"lowerBoundRatio","type":"uint256"}],"internalType":"struct BoundValidator.ValidateConfig[]","name":"configs","type":"tuple[]"}],"name":"setValidateConfigs","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"validateConfigs","outputs":[{"internalType":"address","name":"asset","type":"address"},{"internalType":"uint256","name":"upperBoundRatio","type":"uint256"},{"internalType":"uint256","name":"lowerBoundRatio","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"asset","type":"address"},{"internalType":"uint256","name":"reportedPrice","type":"uint256"},{"internalType":"uint256","name":"anchorPrice","type":"uint256"}],"name":"validatePriceWithAnchorPrice","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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